Make Your Plants Happy – Burgundy Rubber Care Guide

Welcome to our comprehensive Burgundy Rubber Care Guide! Are you a proud owner of a stunning Ficus Elastica Burgundy plant, also known as the rubber plant? If so, you’re in the right place. In this guide, we will provide you with all the essential information and tips to ensure that your burgundy rubber plant thrives and remains healthy. From watering techniques to soil and pruning recommendations, we’ve got you covered.

If you’re wondering how to care for your burgundy rubber plant and maintain its beauty, this guide is here to help. Whether you’re a beginner or an experienced plant parent, our detailed instructions will guide you through each step of the process.

So, let’s dive in and explore the wonderful world of burgundy rubber plants. Get ready to give your plant the care it deserves, and watch it flourish and bring tropical vibes to your space!

Watering and Light Requirements for Burgundy Rubber Plants

Proper watering and providing adequate light are essential for the health and growth of burgundy rubber plants. Understanding the specific requirements will ensure that your plant thrives and maintains its vibrant maroon leaves.


Burgundy rubber plants should be watered regularly to keep the soil moist but not waterlogged. During the summer months, watering every week is recommended, while during winter, watering every 8-10 days is sufficient. Remember to allow the top inch of soil to dry out between waterings to prevent root rot.

It’s important to observe the plant closely and adjust the watering frequency based on environmental conditions such as humidity and temperature. Higher humidity levels may require less frequent watering, while lower humidity levels may necessitate more frequent watering.

Light Requirements:

Burgundy rubber plants thrive in bright, indirect light. Placing them near a north or east-facing window is ideal, as it provides the right amount of brightness without exposing the plant to direct sunlight. Direct sunlight can scorch the leaves and cause them to lose their vibrant color.

If you notice that your plant is leaning towards the light source, rotate it periodically to ensure even growth. The more light the plant receives, the richer and deeper the maroon color of the leaves becomes.

Remember to monitor your burgundy rubber plant for any signs of stress, such as yellowing or dropping leaves, which could indicate watering or lighting issues. Adjusting these factors accordingly will help maintain the health and beauty of your plant.

Soil and Fertilizer Recommendations for Burgundy Rubber Plants

Burgundy rubber plants thrive when planted in well-drained potting mix. It’s important to choose a potting mix specifically formulated for indoor plants to ensure proper drainage and aeration.

When it comes to fertilizing your burgundy rubber plant, it’s best to do so during the spring to fall months, which are the plant’s active growing period. Use a balanced, water-soluble fertilizer with equal ratios of nitrogen, phosphorus, and potassium to promote healthy foliage and growth. Follow the manufacturer’s instructions for proper dilution and application.

During the winter months, when the plant is in its dormant phase, it’s best to avoid fertilization altogether. Giving the plant a break from fertilizer allows it to rest and prepare for new growth in the spring.

Repotting is also an important aspect of maintaining a healthy burgundy rubber plant. As the plant grows, it may outgrow its current container and become root-bound. Repotting should be done every 12-18 months using a pot that is 1-2 inches larger in diameter. This gives the plant room to grow and prevents the roots from becoming overcrowded.

Shock can occur when repotting, so it’s important to monitor the plant closely for any signs of stress or wilting. Provide the plant with adequate water and indirect light during the recovery period, and it will soon adjust to its new pot.

Table: Recommended Soil and Fertilizer Guidelines for Burgundy Rubber Plants

Aspect Recommendation
Soil Well-drained potting mix
Fertilizer Water-soluble balanced fertilizer
Fertilization Period Spring to fall (active growing period)
Winter Fertilization Avoid fertilization during the dormant phase
Repotting Frequency Every 12-18 months
Pot Size 1-2 inches larger in diameter

By following these soil and fertilizer recommendations, you can ensure that your burgundy rubber plant has the proper nutrients and growing conditions to thrive and flourish.

Cleaning and Pruning Tips for Burgundy Rubber Plants

Regular cleaning and pruning are essential for the health and appearance of your burgundy rubber plant. By following these simple tips, you can keep your plant looking fresh and vibrant.

Cleaning Tips

Cleaning the leaves of your burgundy rubber plant helps remove dust and keeps the foliage looking its best. Use a clean, damp cloth to gently wipe the leaves, being careful not to damage them. This will also help prevent pests from gaining a foothold on your plant.

It’s recommended to clean your plant’s leaves once a month. Take this opportunity to inspect the leaves for any signs of pests or disease. If you notice any issues, take appropriate action to address them.

Pruning Tips

Pruning is another important aspect of burgundy rubber plant care. It helps control the plant’s growth and encourages bushier, more compact growth. Pruning can be done at any time of the year, but it’s best to do it in the spring or early summer when the plant is actively growing.

To prune your burgundy rubber plant, use clean and sharp pruning shears or scissors. Remove any leggy or unhealthy-looking stems by cutting them back to the base of the plant. You can also prune back any overly long or unruly branches to promote a more balanced shape.

Propagation and Additional Tips

If you want to expand your collection of burgundy rubber plants, you can propagate them through stem cuttings. Simply take a healthy cutting that has at least two nodes, remove the lower leaves, and place it in a container with fresh, well-draining soil. Keep the soil lightly moist and provide bright, indirect light. Within a few weeks, roots should start to develop, and you’ll have a new plant to enjoy!

Remember, burgundy rubber plants are toxic to pets, so keep them out of reach of furry friends. Additionally, be mindful of the plant’s light requirements, as excessive sun exposure can scorch the leaves. With proper cleaning, pruning, and care, your burgundy rubber plant will thrive and bring beauty to your space.

burgundy rubber plant

Repotting and Propagation Techniques for Burgundy Rubber Plants

If you want your burgundy rubber plant to continue thriving, it’s essential to understand the repotting process and how to propagate new plants from cuttings.

Repotting your Burgundy Rubber Plant

Repotting your burgundy rubber plant every 12-18 months is crucial for its continued growth and health. The process involves transferring the plant to a larger pot, providing it with more room for the roots to spread and access nutrients. It’s best to do this during the growing months, such as spring or summer, to minimize shock to the plant.

When repotting, choose a pot that is 1-2 inches larger than the current container to allow for future growth. Ensure that the pot has drainage holes at the bottom to prevent water from pooling and potentially causing root rot.

Gently remove the plant from its current pot, being careful not to damage the roots. Shake off any excess soil and place it in the new pot. Fill the remaining space with fresh, well-draining soil, pressing it down gently around the roots. Water the plant thoroughly after repotting to settle the soil and provide the necessary hydration.

Propagation Techniques for Burgundy Rubber Plants

Propagating burgundy rubber plants is an exciting way to expand your plant collection or share the joy of gardening with others. The most common method of propagation is through stem cuttings.

To propagate your burgundy rubber plant, follow these steps:

  1. Choose a healthy stem on the plant that is at least 4-6 inches long.
  2. Using clean, sharp scissors or pruning shears, make a clean cut just below a leaf node (the spot where the leaf meets the stem).
  3. Remove any leaves from the bottom of the cutting, leaving only a few at the top.
  4. Dip the cut end of the stem in a rooting hormone powder to promote root growth.
  5. Place the cutting in a small pot filled with fresh, well-draining soil.
  6. Water the cutting lightly and cover the pot with a clear plastic bag or a propagation dome to create a humid environment.
  7. Put the pot in a warm and bright location, but away from direct sunlight.
  8. Keep the soil lightly moist, misting the leaves occasionally to maintain humidity.
  9. After a few weeks, roots should start to develop. You can gently tug on the cutting to check for resistance, indicating that the roots have formed.
  10. Once the roots are established, you can transfer the new plant to a larger pot and treat it as a mature burgundy rubber plant.

Propagation can be a rewarding process, allowing you to create new plants from an existing one. It’s important to monitor the new plant closely for any signs of stress or disease and adjust the care accordingly.

Beautiful Table: Repotting Tips

When to Repot Pot Size Soil Type Watering after Repotting
Every 12-18 months 1-2 inches larger than current pot Well-draining potting mix Thoroughly water to settle the soil
During growing months (spring or summer) Ensure drainage holes Avoid waterlogged soil Keep soil lightly moist after repotting

The Beauty and Characteristics of Burgundy Rubber Plants

Burgundy rubber plants, also known as Ficus Elastica Burgundy, are stunning houseplants that bring a touch of tropical elegance to any space. These plants feature large, glossy leaves with a rubbery texture, making them a standout feature in any room. The leaves are a deep maroon color, giving the plant its unique and eye-catching appearance.

With their dramatic height and fullness, burgundy rubber plants serve as striking focal points. Their lush foliage adds a sense of luxury and lushness to any interior. Whether placed in a living room, office, or bedroom, these plants bring a touch of natural beauty and elegance to your surroundings.

While burgundy rubber plants are known for their stunning appearance, it’s important to note that they are toxic to pets. If you have furry friends at home, exercise caution and ensure they cannot access the plant. Safety measures such as keeping the plant out of reach or choosing pet-friendly alternatives are essential to ensure the well-being of your pets.

Key Features of Burgundy Rubber Plants:

  • Large, glossy leaves with a rubbery texture
  • Deep maroon color
  • Dramatic height and fullness
  • Brings a touch of tropical elegance to any space
  • Toxic to pets

In summary, burgundy rubber plants are prized for their captivating beauty and unique characteristics. With proper care and attention, these plants can thrive in various indoor environments, adding a touch of natural charm to your home or office.


Caring for a burgundy rubber plant is a breeze with the right tips and techniques. By following the care guide provided in this article, you can ensure that your plant thrives and adds a touch of tropical elegance to your space.

To keep your burgundy rubber plant healthy, remember to provide it with the right amount of water and light. Water weekly during the summer and adjust the frequency to every 8-10 days during winter. Place your plant in a bright location, but avoid direct sunlight to prevent leaf damage.

In terms of soil and fertilizer, use a well-drained potting mix and avoid overwatering. Fertilize during the active growing months and avoid fertilization during the winter dormant period. Repotting can be done every 12-18 months to accommodate growth, but be mindful of any changes and potential shock to the plant.

Lastly, maintain the beauty of your burgundy rubber plant by cleaning its leaves regularly and pruning when necessary. Propagation can be done by cutting and planting in well-draining soil. Just make sure to monitor your plant for any changes after repotting or propagation.

Caring for your burgundy rubber plant doesn’t have to be complicated. With these rubber plant care tips, you’ll have a thriving and stunning plant that will bring joy to your home or office.


How often should I water my burgundy rubber plant?

Water your burgundy rubber plant weekly during the summer and every 8-10 days during winter.

What is the best lighting for a burgundy rubber plant?

Burgundy rubber plants thrive in bright light but should be kept away from direct sunlight to avoid leaf damage.

How often should I fertilize my burgundy rubber plant?

Fertilize your burgundy rubber plant during the spring to fall months, but avoid fertilization during the dormant period in winter.

How should I clean the leaves of my burgundy rubber plant?

Regularly clean the leaves of your burgundy rubber plant with a clean, damp cloth to keep it looking fresh.

When should I repot my burgundy rubber plant?

Repot your burgundy rubber plant every 12-18 months using a pot that is 1-2″ larger than the current container.

How can I propagate my burgundy rubber plant?

Propagation of a burgundy rubber plant can be done by cutting a piece of the plant, removing the bottom leaves, and placing it in fresh, well-draining soil with root hormone powder.

What are the characteristics of a burgundy rubber plant?

Burgundy rubber plants have large, rubbery-textured leaves with a glossy maroon color, adding a tropical charm to any space.